BFYWW - UNION CARBIDE SAG 10 SILICONE ANTIFOAM EMLN

  • MSDS: BFYWW
  • Manufacturer: UNION CARBIDE CORP
  • Product Name: UNION CARBIDE SAG 10 SILICONE ANTIFOAM EMLN
  • National Stock Number: 6850-00-950-6489
Product Identification

Product ID:UNION CARBIDE SAG 10 SILICONE ANTIFOAM EMLN
MSDS Date:01/01/1987
FSC:6850
NIIN:00-950-6489
MSDS Number: BFYWW

Responsible Party
UNION CARBIDE CORPORATION
39 OLD RIDGEBURY RD
DANBURY, CT 06817
US

Emergency Phone: 800-822-4357

Info Phone: 800-822-4357

Cage: 61637

Contractor
UNION CARBIDE CORP
DANBURY, CT 06817-0001 US

Telephone: 800-822-4357/732-563-5522 (MSDS)

Cage: 61637

Ingredients

POLYDIMETHYL SILOXANE EMULSION

Fraction By Weight: <99%


ADDITIVES (PROPRIETARY COMPOSITION)

Fraction By Weight: >1.0%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:THIS PRODUCT DOES NOT CONTAIN
CARCINOGENS.
Effects of Overexposure:MAY CAUSE MILD IRRITATION OF EYES OR SKIN ON
PROLONGED OR REPEATED CONTACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALE: REMOVE TO FRESH AIR, GIVE CPR/OXYGEN IF NEED.
EYES/SKIN: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15 MIN. INGEST:
RINSE MOUTH. GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY,
OR OTHER SYMPT OMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:NONE
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN CASE OF FIRE.
Unusual Fire/Explosion Hazard:NONE NOTED

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION; USE SUITABLE
ABSORBENT MATERIAL AND COLLECT FOR DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY AREA; KEEP AWAY
FROM HEAT, OPEN FLAMES; KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES. USE PROPER
PROTECTION; WASH THOROUGHLY AFTER EACH USE, AS GOOD HYGIENE
PRACTICE.

Exposure Controls

Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER ORDINARY
CONDITIONS, USE ADEQUATE VENTILATION.
Ventilation:MECHANICAL (GENERAL) OR LOCAL EXHAUST THAT PROVIDES
ADEQUATE VENTILATION.
Protective Gloves:PVC/RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:FULL PROTECTIVE CLOTHING, SAFETY SHOWER, EYE
WASH STATION.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, DRINKING OR
SMOKING.
Supplemental Safety and Health
MSDS DATED:01/10/86; OTHER EMERGENCY PHONE #( 800)UCC-HELP.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F/100C
Vapor Pres:<20
Vapor Density:>1.0
Spec Gravity:1.0
Evaporation Rate & Reference:<1.0 (BUT-ACET=1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:MILKY-WHITE LIQUID; MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE NOTED
Stability Condition to Avoid:HEAT, OPEN FLAMES.
Hazardous Decomposition Products:BURNING CAN PRODUCE CARBON MONOXIDE,
CARBON DIOXIDE, OXIDES OF SILICONE.

Disposal

Waste Disposal Methods:COLLECTED MATERIAL MAY BE DISPOSED OF IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.